Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing Engine Oil on Sym Joymax 300 I

Model: Sym Joymax 300 I
Part: Engine oil

Video tutorial

In this tutorial video, learn how to change the engine oil on a Sym Joymax 300 I. First, unscrew the oil drain bolt using a 17 mm socket wrench: then finish unscrewing slowly and let all the oil drain into a container; wait about ten minutes before replacing the bolt.

At this point, remove the spring and replace the filter attached to the cap; then reassemble everything and pour the new engine oil (10w40 type) into the designated upper hole: fill to the correct level (capacity of about 1L-1.2L)!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How do you change the engine oil of the Sym Joymax 300 Evo?
How do you change the engine oil of the Sym Joymax 300 Evo?
Joymax 300 I To replace the engine oil of the Sym Joymax 300 Evo, you need to loosen the drain plug located at the central lower part of the vehicle: this way, yo…
Replacing the Battery on a Sym Joymax 300
Replacing the Battery on a Sym Joymax 300
Joymax 300 I Today, remove and replace the battery of a Sym Joymax 300 scooter. First, remove the side plastic covers by unscrewing the fixing screws to access th…
How do you disassemble the engine of the Sym Joymax 300?
How do you disassemble the engine of the Sym Joymax 300?
Joymax 300 I To disassemble the engine of the Sym Joymax 300, you need to loosen the screws that fix it to the respective supports, so that it can be removed from…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos