Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on a Sym Joymax 300

Model: Sym Joymax 300 I
Part: Battery

Video tutorial

Today, remove and replace the battery of a Sym Joymax 300 scooter. First, remove the side plastic covers by unscrewing the fixing screws to access the right side battery compartment; then remove the fixing screw of the bracket and take it off. Next, disconnect the battery terminals by unscrewing the screws and removing the negative terminal first to avoid any short circuits.

Finally, remove the old battery and replace it with the correct new one: now insert it and reassemble everything.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Changing Engine Oil on Sym Joymax 300 I
Changing Engine Oil on Sym Joymax 300 I
Joymax 300 I In this tutorial video, learn how to change the engine oil on a Sym Joymax 300 I. First, unscrew the oil drain bolt using a 17 mm socket wrench: then…
Replacing Front Brake Pads on the Sym Joymax 300i
Replacing Front Brake Pads on the Sym Joymax 300i
Joymax 300 I Today, learn how to remove the front brake pads on a Sym Joymax 300i scooter. First, undo the bolts of the brake caliper using a 12 mm socket spanner…
How do you disassemble the engine of the Sym Joymax 300?
How do you disassemble the engine of the Sym Joymax 300?
Joymax 300 I To disassemble the engine of the Sym Joymax 300, you need to loosen the screws that fix it to the respective supports, so that it can be removed from…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos