Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Pads on the Sym Joymax 300i

Model: Sym Joymax 300 I
Part: Brake pads

Video tutorial

Today, learn how to remove the front brake pads on a Sym Joymax 300i scooter. First, undo the bolts of the brake caliper using a 12 mm socket spanner; then remove the caliper from the disc.

At this point, use a sharp tool to remove the retaining clip and the central locking pin; now you can extract the old pads and replace them with new ones. Before refitting, clean the inside of the caliper from any carbon deposits; apply the reverse procedure for reassembly!


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Replace the Transmission on a Sym Joymax 300i?
How to Replace the Transmission on a Sym Joymax 300i?
Joymax 300 I To replace the transmission on a Sym Joymax 300i, you need to loosen the screws that secure the specific cover located on the left side of the bike n…
Replacing the Battery on a Sym Joymax 300
Replacing the Battery on a Sym Joymax 300
Joymax 300 I Today, remove and replace the battery of a Sym Joymax 300 scooter. First, remove the side plastic covers by unscrewing the fixing screws to access th…
Changing Brake Pads on the Sym Joymax 300 I
Changing Brake Pads on the Sym Joymax 300 I
Joymax 300 I First, place your motorcycle (in this case, the Sym Joymax 300 I) in a stable and secure position, immobilising it while you work. This is to ensure …

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos