Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Sym
  4. : Vs 125

Model: Sym Vs 125
Part: Battery

In this video, see how to disassemble and replace the battery on a Sym VS 125 scooter in simple steps. First, remove the cover of the battery compartment located on the right side; use a 10 mm socket spanner to unscrew the screws of the plastic panel, as shown in the video. Once removed, access the battery, where you will disconnect the two terminals (positive and negative) using the same socket spanner; then remove it and replace it with a new one of the correct type, and reassemble everything!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Jet X 125 To replace the battery of the Sym Jet X 125, you need to remove the cover of the footwell of the scooter to access the screws that secure the side pa…
Joymax 250 To replace the battery of the Sym Joymax 125, loosen the two screws securing the plastic cover located between the handlebars and the footwell of the…
Jet Power 125 In this brief tutorial, you will see the steps to dismantle and replace the engine battery on a Sym Jet Power 125 scooter. First, position your scoot…

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos