Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement on Sym Maxsym TL 500

Model: Sym Maxsym Tl 500
Part: Engine oil

Video tutorial

In this video, you will learn how to replace the engine oil and oil filter on a Sym Maxsym TL 500 scooter. First, position the scooter on the centre stand and remove the oil drain bolt located at the bottom of the engine; allow the oil to drain into a container, waiting about twenty minutes before refitting the bolt.

Next, remove the oil filter, which is near the oil cap: unscrew it with a spanner and replace it with the new one of the correct type (ensure the gasket is fitted correctly). Finally, pour in the new oil!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to replace the engine oil of the Sym MaxSym TL 500.
How to replace the engine oil of the Sym MaxSym TL 500.
Maxsym Tl 500 In this guide, we will see the instructions that will allow us to change the engine oil while performing the routine maintenance service for the Sym …
How to Change the Engine Oil on the Sym MaxSym TL 500
How to Change the Engine Oil on the Sym MaxSym TL 500
Maxsym Tl 500 This brief and simple guide shows how to perform the routine maintenance service for changing the oil on the Sym MaxSym TL 500 scooter. First, place …
How do you replace the engine oil of the Sym MaxSym TL 500?
How do you replace the engine oil of the Sym MaxSym TL 500?
Maxsym Tl 500 To perform an oil change on the Sym MaxSym TL 500, you will need to unscrew the drain plug located in the lower center of the motorcycle: once the pl…

How to Replace the Front Headlight Bulbs in the Aprilia Tuono V4 1100?

In this tutorial, you will see how to replace the front headlight bulbs in the Aprilia Tuono V4 1100, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by positioning yourself near the headlight in question, then locate and open the circular cap at the back of it. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from its housing. Finally, insert the replacement bulb without touching the glass with bare hands and follow the reverse procedure to reassemble everything.

Watch the video!


by ScegliAuto

More videos