Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on the Sym MaxSym TL 500

Model: Sym Maxsym Tl 500
Part: Engine oil

Video tutorial

This brief and simple guide shows how to perform the routine maintenance service for changing the oil on the Sym MaxSym TL 500 scooter. First, place the scooter on its centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew and remove the oil filter cartridge found near the sump using the appropriate tool, replacing it with a new one (screw it in and tighten by hand); finally, pour in the new engine oil with the correct specifications!


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to replace the engine oil of the Sym MaxSym TL 500.
How to replace the engine oil of the Sym MaxSym TL 500.
Maxsym Tl 500 In this guide, we will see the instructions that will allow us to change the engine oil while performing the routine maintenance service for the Sym …
Engine Oil and Oil Filter Replacement on Sym Maxsym TL 500
Engine Oil and Oil Filter Replacement on Sym Maxsym TL 500
Maxsym Tl 500 In this video, you will learn how to replace the engine oil and oil filter on a Sym Maxsym TL 500 scooter. First, position the scooter on the centre …
How do you replace the engine oil of the Sym MaxSym TL 500?
How do you replace the engine oil of the Sym MaxSym TL 500?
Maxsym Tl 500 To perform an oil change on the Sym MaxSym TL 500, you will need to unscrew the drain plug located in the lower center of the motorcycle: once the pl…

How to Dismantle the Engine of the TM Racing MX 125?

To dismantle the engine of the TM Racing MX 125, loosen the screws securing the side casing of the bike so that it can be removed, providing access to the clutch. Next, remove the spark plug from the top of the cylinder, then loosen the screws securing the cylinder as well: after removing the cylinder, you will be able to locate the piston underneath, which must be freed from the conrod by expanding its retaining ring. At this point, all further components within the engine block can be removed and replaced with new ones.

Watch the video!


by ScegliAuto

More videos