Do it yourself
Frequently asked questions about cars and motorcycles
In this guide, we will see the instructions that will allow us to change the engine oil while performing the routine maintenance service for the Sym MaxSym TL 500 scooter. First, let's put the scooter on the stand and begin unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then, unscrew and replace the oil filter cartridge. At this point, unscrew the filler cap and top up with the new engine oil of the correct type, filling it up to the maximum level mark.

Posted on 7 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Maxsym Tl 500 In this video, you will learn how to replace the engine oil and oil filter on a Sym Maxsym TL 500 scooter. First, position the scooter on the centre …
Maxsym Tl 500 This brief and simple guide shows how to perform the routine maintenance service for changing the oil on the Sym MaxSym TL 500 scooter. First, place …
Maxsym Tl 500 To perform an oil change on the Sym MaxSym TL 500, you will need to unscrew the drain plug located in the lower center of the motorcycle: once the pl…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos