Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Fiddle
Part:

Before you can start, position your Sym Fiddle on the central stand. Begin by unscrewing and removing the bolts that secure the variator cover. Next, unclip and move the cover itself. Proceed to unscrew and remove the nuts that secure the variator belt pulleys, and then remove the pulleys themselves. Once you have removed the pulleys, you will have freed the variator belt, which you can then remove. After completing this step, you will have finished the disassembly.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Variator on a Sym Fiddle
How to Replace the Variator on a Sym Fiddle
Fiddle To replace the variator on a Sym Fiddle, you need to open the transmission cover, located near the rear wheel on the left side of the scooter. Once t…
How do you install the windshield of the Sym Fiddle?
How do you install the windshield of the Sym Fiddle?
Fiddle To install the windshield of the Sym Fiddle, you need to grab the rearview mirrors, so that you can turn them counterclockwise to release them from t…
How do you replace the handles of the Sym Fiddle?
How do you replace the handles of the Sym Fiddle?
Fiddle To replace the handles of the Sym Fiddle, you will need to loosen the screws that secure the front panel of the motorcycle: these screws will be loca…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos