Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Hd 200 Evo
Part: Drivetrain

To replace the transmission on the Sym HD 200i, loosen all the bolts securing the cover of the casing located near the rear wheel on the left side of the bike. Once the casing is open, you can loosen the nut securing the central pin of the variator and subsequently the clutch bell. Once the bell is removed, both the clutch and the variator can be pulled out along with the corresponding belt. Once removed, all parts can be replaced, and the casing can be closed again with the respective cover.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Belt on the Sym HD 200i
How to Replace the Belt on the Sym HD 200i
Hd 200 Evo To replace the belt on the Sym HD 200i, loosen the screws securing the cover located near the rear wheel on the left side of the vehicle. Once the co…
How to Change the Gear Oil of the Sym HD 200
How to Change the Gear Oil of the Sym HD 200
Hd 200 Evo In this short and simple guide, you will see how to change the transmission oil of the Sym HD 200 scooter. First, place your scooter on the centre st…
How do you replace the exhaust pipe of the Sym HD 200?
How do you replace the exhaust pipe of the Sym HD 200?
Hd 200 Evo It will be possible to replace the muffler on the Sym HD 200 by loosening the screws that secure the exhaust terminal to its housing: once these scre…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos