Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Belt and Variator on the Sym Jet14 124

Model: Sym Jet14 125
Part:

Video tutorial

In this guide, discover how to disassemble and replace the drive belt and variator on the Sym Jet14 125 scooter by following the instructions below. First, remove the clutch side cover by unscrewing all the side screws; then remove the pulley and fan by unscrewing the central nuts, as shown in the video.

At this point, you can remove the drive belt and variator, along with the rollers; all that’s left is to clean the inside of the cover and reassemble everything, following the video tutorial to the end!


Updated on 19 May 2026 by ScegliAuto


Related tutorials

Jet14 125 To reset the Oil Check light on the Sym Jet14, turn on the ignition by inserting the key into the ignition switch. Once the dashboard is lit, press a…
Jet14 125 In order to replace the ignition switch of the Sym Jet14 125, you will need to loosen the fixing screws of the panel covering the switch itself: the …
Jet14 125 Change the engine oil of the Sym Jet14 125 scooter, performing the routine maintenance service. First, place your scooter on the centre stand and beg…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos