Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Voltage Regulator on a Sym Fiddle 3

Model: Sym Fiddle

Video tutorial

This guide provides instructions for removing and replacing the voltage regulator on a Sym Fiddle 3 scooter by following these simple steps. First, place the scooter on its centre stand and start unscrewing all the screws securing the lower plastic fairings to remove them.

Next, locate the voltage regulator at the rear, unscrew its mounting screws, and disconnect the wiring to remove it, as shown in the video. Install the new original voltage regulator and reassemble everything!


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Sym Fiddle
How to Replace the Exhaust on a Sym Fiddle
Fiddle In today's video, you will see the steps to remove and replace the exhaust on the Sym Fiddle scooter. First, position the scooter on the centre stand…
How to Remove the Front Headlight from a Sym Fiddle
How to Remove the Front Headlight from a Sym Fiddle
Fiddle Before you can start, position your Sym Fiddle on its central stand. Begin by unscrewing and removing the screws that secure the front headlight to t…
How to Replace the Air Filter on a Sym Fiddle
How to Replace the Air Filter on a Sym Fiddle
Fiddle To replace the air filter on a Sym Fiddle, loosen the bolts securing the cover at the rear of the scooter, just above the gearbox. Once the bolts are…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos