Do it yourself
Frequently asked questions about cars and motorcycles
To replace the spark plug on the Sym MaxSym 600, lift the seat to access the under-seat compartment. Remove the plastic cover by unscrewing the screws to reach the components underneath. Here, you will find the air filter box, which can be removed by unscrewing its screws. Beneath it, there will be the connector attached to the spark plug, which must be disconnected to replace the spark plug. Reconnect the connector and reassemble all previously removed components.

Updated on 30 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Maxsym 600 To replace the belt on the Sym MaxSym 600, you need to loosen the bolts securing the cover near the rear wheel on the left side of the bike. Once the…
Maxsym 600 In this video tutorial, we will see how to change the engine oil of a Sym Maxsym 600cc in simple steps. First, place the central stand on your scoote…
Maxsym 600 To remove the windscreen of the Sym MaxSYM 600i, you need to loosen the bolts located at the bottom of the windscreen, behind the plastic cover. This…

How to Replace the Key Battery on a BMW R1250GSA

To replace the key battery on your BMW R 1250 GSA, start by locating the opening slot on the key. Once you have found the slot, use a small screwdriver or a coin to carefully pry open the key. Find the existing battery and remove it carefully. Ensure you insert the new battery with the correct polarity. Close the key securely and check that it is properly sealed. Finally, test the key to ensure it works correctly. If in doubt, consult the owner's manual for detailed instructions.

Watch the video!


by ScegliAuto

More videos