Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Maxsym 600

Sym Maxsym 600 - Video guides

Sym Maxsym 600
Importance of ABS and TCS on a two-wheeled vehicle
In this video, we can see the difference on a scooter with the ABS/TCS systems on or off. ABS= Antilock Braking System - anti-lock system. When braking with …Read all…
Posted on 2 September 2025 by ScegliAuto
Sym Maxsym 600
How to Replace the Spark Plug on the Sym MaxSym 600
To replace the spark plug on the Sym MaxSym 600, lift the seat to access the under-seat compartment. Remove the plastic cover by unscrewing the screws to reach …Read all…
Posted on 15 September 2026 by ScegliAuto
Sym Maxsym 600
How to Replace the Belt on the Sym MaxSym 600
To replace the belt on the Sym MaxSym 600, you need to loosen the bolts securing the cover near the rear wheel on the left side of the bike. Once the bolts are …Read all…
Posted on 12 August 2026 by ScegliAuto
Sym Maxsym 600
How to Remove the Windscreen and Front Bulbs of the Sym MaxSYM 600i?
To remove the windscreen of the Sym MaxSYM 600i, you need to loosen the bolts located at the bottom of the windscreen, behind the plastic cover. This can be …Read all…
Posted on 7 June 2026 by ScegliAuto
Sym Maxsym 600
How to Remove the Windscreen of the Sym MaxSym 600i?
To remove the windscreen of the Sym MaxSym 600i, first remove the screws located underneath the plastic front panel, directly below the windscreen. Once this …Read all…
Posted on 1 June 2026 by ScegliAuto
Sym Maxsym 600
Engine Oil Change for Sym Maxsym 600
In this video tutorial, we will see how to change the engine oil of a Sym Maxsym 600cc in simple steps. First, place the central stand on your scooter; then …Read all…
Posted on 8 May 2026 by ScegliAuto

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos