Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Levers on a Sym MaxSym TL 500

Model: Sym Maxsym Tl 500
Part:

Video tutorial

To replace the brake and clutch levers on the Sym MaxSym TL 500, loosen the screws located on both sides of the handlebar: once these screws are loosened and removed, you can proceed to loosen the nuts that secure these levers to their corresponding brake and clutch cables.

This way, you can attach the new replacement levers in the correct position; finally, reinsert the corresponding screw that was removed earlier to secure the lever and check that it functions correctly.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

Where is the battery located on the SYM MAXSYM TL 500?
Where is the battery located on the SYM MAXSYM TL 500?
Maxsym Tl 500 Unlike other motorcycle brands that place the battery inside the seat, the Sym Maxsym TL 500 model motorcycle places the battery inside the right sid…
How to replace the engine oil of the Sym MaxSym TL 500.
How to replace the engine oil of the Sym MaxSym TL 500.
Maxsym Tl 500 In this guide, we will see the instructions that will allow us to change the engine oil while performing the routine maintenance service for the Sym …
How to Replace the Variator Rollers on Sym MaxSym TL 500
How to Replace the Variator Rollers on Sym MaxSym TL 500
Maxsym Tl 500 In this video tutorial, we will see the main steps to disassemble and replace the variator rollers on the Sym Maxsym TL 500 scooter, following the in…

How to Replace the Front Headlight Bulbs in the Aprilia Tuono V4 1100?

In this tutorial, you will see how to replace the front headlight bulbs in the Aprilia Tuono V4 1100, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by positioning yourself near the headlight in question, then locate and open the circular cap at the back of it. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from its housing. Finally, insert the replacement bulb without touching the glass with bare hands and follow the reverse procedure to reassemble everything.

Watch the video!


by ScegliAuto

More videos