Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Maxsym Tl 500
Part:

In this video tutorial, we will see the main steps to disassemble and replace the variator rollers on the Sym Maxsym TL 500 scooter, following the instructions below. First, remove the clutch side cover by unscrewing all the screws to access the entire transmission; then remove the central nut of the variator to take off the belt, as shown in the video. At this point, we can remove and replace the rollers found inside; just reassemble everything by applying the reverse procedure!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Sym MaxSym TL 500
How to Replace the Air Filter on the Sym MaxSym TL 500
Maxsym Tl 500 To replace the air filter on the Sym MaxSym TL 500, you need to lift the panel located on the left side of the footwell. Once this panel is removed, …
How to Replace the Levers on a Sym MaxSym TL 500
How to Replace the Levers on a Sym MaxSym TL 500
Maxsym Tl 500 To replace the brake and clutch levers on the Sym MaxSym TL 500, loosen the screws located on both sides of the handlebar: once these screws are loos…
How do you replace the engine oil of the Sym MaxSym TL 500?
How do you replace the engine oil of the Sym MaxSym TL 500?
Maxsym Tl 500 To perform an oil change on the Sym MaxSym TL 500, you will need to unscrew the drain plug located in the lower center of the motorcycle: once the pl…

Replacing the Headlight Bulb on the Yamaha Mio 125

This brief guide will show you how to remove and replace the headlight bulb on the Yamaha Mio 125 scooter in simple and quick steps. First, place the scooter on the centre stand and begin to remove the front headlight; to do this, unscrew the fastening screws located at the bottom and disconnect the electrical connector of the light found at the back, as illustrated in the video. At this point, remove and replace the bulb with a new one of the correct type and with the same fitting; finally, reassemble the front headlight with its front fairing!

Watch the video!


by ScegliAuto

More videos