Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The air filter of the Sym MaxSym TL 508 can be replaced by loosening the screws that secure the side protection panel of the vehicle, which is located on the left side immediately below the fuel tank. Once this panel has been removed, it will be possible to proceed by unscrewing the screws that also secure the underlying filter, which can then be removed from inside its box; in this way it will be possible to insert the new filter into its seat, securing it with the appropriate screws and then covering everything with the side fairing that was previously removed.

Posted on 3 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Sym MaxSym TL 500
How to Replace the Air Filter on the Sym MaxSym TL 500
Maxsym Tl 500 To replace the air filter on the Sym MaxSym TL 500, you need to lift the panel located on the left side of the footwell. Once this panel is removed, …
How to replace the air filter on the Sym MaxSym TL500?
How to replace the air filter on the Sym MaxSym TL500?
Maxsym Tl 500 To replace the air filter on the Sym MaxSym TL500, loosen the screws securing the side protection panel of the bike, located on the left side just be…
How do you replace the engine oil of the Sym MaxSym TL 500?
How do you replace the engine oil of the Sym MaxSym TL 500?
Maxsym Tl 500 To perform an oil change on the Sym MaxSym TL 500, you will need to unscrew the drain plug located in the lower center of the motorcycle: once the pl…

How to Replace the Clutch Cable on the Royal Enfield Classic 350

In this guide, you will learn how to remove and replace the clutch cable on the Royal Enfield Classic 350 motorcycle. First, place your bike on the centre stand and begin unscrewing the adjuster located above the clutch cover on the left side; then detach the cable. Next, remove the cable from the clutch lever, pulling it out along with the outer casing. Now, replace it with the new, correct type, connecting the cable to the clutch lever. Finally, adjust the clutch to set the disengagement.

Watch the video!


by ScegliAuto

More videos