Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust of the Sym MaxSym TL 500?

Model: Sym Maxsym Tl 500
Part: Exhaust muffler

Video tutorial

To replace the exhaust of the Sym MaxSym TL 500, loosen the bolts that secure the exhaust terminal to its housing, located on the right side of the bike near the rear wheel. Once the support bolts are loosened, you can proceed to remove the ring that connects the exhaust terminal to the manifold, allowing it to be completely detached.

After removal, position the new exhaust in its place, ensuring it is secured and connected properly with the previously removed ring.


Updated on 18 October 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on the Sym MaxSym TL 500?
How to Replace the Exhaust on the Sym MaxSym TL 500?
Maxsym Tl 500 To replace the exhaust on the Sym MaxSym TL 500, loosen the screws securing the exhaust end can to its housing, located on the right side of the bike…
How to replace the exhaust on the Sym MaxSym TL 500?
How to replace the exhaust on the Sym MaxSym TL 500?
Maxsym Tl 500 To replace the exhaust on the Sym MaxSym TL 500, you need to loosen the screws that secure the exhaust terminal to its housing, located on the right …
How to Replace the Air Filter on the Sym MaxSym TL 500
How to Replace the Air Filter on the Sym MaxSym TL 500
Maxsym Tl 500 To replace the air filter on the Sym MaxSym TL 500, you need to lift the panel located on the left side of the footwell. Once this panel is removed, …

How to Replace the Front Headlight Bulbs in the Aprilia Tuono V4 1100?

In this tutorial, you will see how to replace the front headlight bulbs in the Aprilia Tuono V4 1100, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by positioning yourself near the headlight in question, then locate and open the circular cap at the back of it. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from its housing. Finally, insert the replacement bulb without touching the glass with bare hands and follow the reverse procedure to reassemble everything.

Watch the video!


by ScegliAuto

More videos