Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust on the Sym MaxSym TL 500, you need to loosen the screws that secure the exhaust terminal to its housing, located on the right side of the bike near the rear wheel: once the screws of the supports are loosened, you can widen the ring that connects the exhaust to the exhaust manifold. You can then insert the new replacement part into its seat, allowing you to connect it via the ring and secure it to the respective supports on the side of the bike.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Maxsym Tl 500 In order to replace the exhaust pipe of the Sym MaxSym TL 500, you need to loosen the screws that fix the exhaust terminal to its housing, located on…
Maxsym Tl 500 The procedure for replacing the exhaust pipe of the Sym MaxSym TL 500 can be carried out by loosening the screws that fix the exhaust terminal to its…
Maxsym Tl 500 In order to replace the transmission of the Sym MaxSym TL 500, you need to loosen the screws that secure the specific casing, located on the right si…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos