Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Tire on the Tata Nano Genx

Model: Tata Nano Genx MK 1 - Years 2015-2018
Part: Wheel

In this guide, follow the main instructions to remove and replace the tire with the spare tire on the Tata Nano Genx. First, gather the tire replacement kit; then lift the vehicle with the jack and remove the spare tire from the front compartment, as shown in the video. At this point, loosen the wheel bolts to remove the tire and replace it with the spare, tightening the bolts in a crisscross pattern; finally, remove the jack and place the old tire and the complete kit back in the front compartment, adhering to the speed limits of the spare tire.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Tata Nano Genx (2015-2018 / MK 1) Today, in this brief guide, we will cover the main instructions on how to remove and replace the rear bumper on the Tata Nano Genx in simple steps. F…
Tata Nano Genx (2015-2018 / MK 1) In this short and simple guide, learn how to remove and replace the headlight bulb of the Tata Nano Genx. First, open the hood of your car and start …
Tata Nano Genx (2015-2018 / MK 1) To replace the armrest on the Tata Nano GenX, remove the old armrest from its housing on the top of the center tunnel. Once removed, unscrew the supp…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos