Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Headlight Bulb of the Tata Nano Genx

Model: Tata Nano Genx MK 1 - Years: 2015, 2016, 2017, 2018
Part: Headlight bulb

Video tutorial

In this short and simple guide, learn how to remove and replace the headlight bulb of the Tata Nano Genx. First, open the hood of your car and start by removing the plastic cover at the back of the headlight, unscrewing the screws to detach it from the body.

Then, disconnect the electrical connector of the bulb and release the metal clip to remove it, as shown in the video.

Now, install the new low beam bulb, connect it, and reassemble everything!


Updated on 12 June 2026 by ScegliAuto


Related tutorials

Tata Nano Genx (2015-2018 / MK 1) In this guide, follow the main instructions to remove and replace the tire with the spare tire on the Tata Nano Genx. First, gather the tire replacem…
Tata Nano Genx (2015-2018 / MK 1) Today, in this brief guide, we will cover the main instructions on how to remove and replace the rear bumper on the Tata Nano Genx in simple steps. F…
Tata Nano Genx (2015-2018 / MK 1) To replace the armrest on the Tata Nano GenX, remove the old armrest from its housing on the top of the center tunnel. Once removed, unscrew the supp…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos