Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bumper on the Tata Nano Genx

Model: Tata Nano Genx MK 1 - Years 2015-2018
Part: Rear bumper

Today, in this brief guide, we will cover the main instructions on how to remove and replace the rear bumper on the Tata Nano Genx in simple steps. First, open the trunk lid and start unscrewing all the screws found on both sides of the wheel wells; then remove the taillights by unscrewing the screws and disconnecting the electrical connectors of the bulbs. At this point, gently detach the rear bumper and install the new one after painting it; then reassemble everything by applying the reverse procedure of disassembly!

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Armrest on the Tata Nano GenX?
How to Replace the Armrest on the Tata Nano GenX?
Tata Nano Genx (2015-2018 / MK 1) To replace the armrest on the Tata Nano GenX, remove the old armrest from its housing on the top of the center tunnel. Once removed, unscrew the supp…
Replacing the Headlight Bulb of the Tata Nano Genx
Replacing the Headlight Bulb of the Tata Nano Genx
Tata Nano Genx (2015-2018 / MK 1) In this short and simple guide, learn how to remove and replace the headlight bulb of the Tata Nano Genx. First, open the hood of your car and start …
How to Replace the Tire on the Tata Nano Genx
How to Replace the Tire on the Tata Nano Genx
Tata Nano Genx (2015-2018 / MK 1) In this guide, follow the main instructions to remove and replace the tire with the spare tire on the Tata Nano Genx. First, gather the tire replacem…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos