Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the wheel with the spare wheel of the Tata Hexa

Model: Tata Hexa MK 1 - Years 2016-2020
Part: Wheel

Let's see in this short and simple guide the steps on how to disassemble and replace the wheel with the spare one of the Tata Hexa. First of all, let's get the kit necessary for replacing the wheel; then we jack up the car and unscrew the wheel bolts to remove it, as shown in the video. At this point we are going to install the new spare wheel, located on the rear compartment of the car, making sure that the air pressure is correct; so let's go and fix the wheel, screwing the bolts crosswise, following the video tutorial to the end!

Posted on 23 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the front brake disc of the Tata Hexa?
How do you remove the front brake disc of the Tata Hexa?
Tata Hexa (2016-2020 / MK 1) In order to remove the front brake disc of the Tata Hexa you have to go and lift the car so that the corresponding wheel is not in contact with the f…
How do you replace the headlight bulb on the Tata Hexa?
How do you replace the headlight bulb on the Tata Hexa?
Tata Hexa (2016-2020 / MK 1) In order to replace the bulb in the Tata Hexa headlight, you need to open the bonnet in order to access the rear part of the headlight corresponding …
Replacing the headlight bulb of the Tata Hexa
Replacing the headlight bulb of the Tata Hexa
Tata Hexa (2016-2020 / MK 1) Today we will see, in this video tutorial, how to disassemble and replace the headlight bulb of the Tata Hexa, following these simple and quick steps…

Removing the Front Arm Bushing of a Hyundai Getz

Let's look at removing the front arm bushing of a Hyundai Getz. First, place the car on a column lift and loosen the wheel nuts with a telescopic spanner, then remove the wheel. Use a socket spanner to unscrew the lower securing bolt of the arm and the bolt mounted under the wheel hub, then unscrew the bolts on the upper part of the arm (as shown in the video). Remove the bushing from the bolt housing. Always compare the parts to be replaced with the new ones; if they are suitable, you can install them. Start the installation of the new part: fit the new bushing and tighten all bolts to the specified torque. Double-check the correct tightening of the parts. Refit the wheel to complete the job.

Watch the video!


by ScegliAuto

More videos