Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Brake Rotor of the Tata Hexa?

Model: Tata Hexa MK 1 - Years 2016-2020
Part: Brake rotors

To remove the front brake rotor of the Tata Hexa, lift the vehicle so that the corresponding wheel is off the ground. Once lifted, loosen the bolts securing the wheel and remove it to access the components behind it. Next, remove the bolts securing the caliper to its rotor, completely detaching it to loosen the bolts holding the rotor. This will allow you to remove the rotor and install the new one, reassembling all previously removed components.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Tata Hexa
How to Replace the Headlight Bulb on a Tata Hexa
Tata Hexa (2016-2020 / MK 1) To replace the headlight bulb on a Tata Hexa, open the hood to access the back of the headlight corresponding to the bulb that needs to be replaced. …
Replacing the Headlight Bulb on the Tata Hexa
Replacing the Headlight Bulb on the Tata Hexa
Tata Hexa (2016-2020 / MK 1) Today, you will see in this video tutorial how to disassemble and replace the headlight bulb on the Tata Hexa, following these simple and quick steps…
How to Remove the Steering Wheel Airbag from the Tata Hexa?
How to Remove the Steering Wheel Airbag from the Tata Hexa?
Tata Hexa (2016-2020 / MK 1) To remove the steering wheel airbag from the Tata Hexa, rotate the steering wheel first to the left and then to the right to release the pins at the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos