Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Engine Oil and Oil Filter on Tata Hexa

Model: Tata Hexa MK 1 - Years 2016-2020
Part: Engine oil

Follow these steps to perform routine maintenance by replacing the engine oil and oil filter on the Tata Hexa. First, lift the vehicle and start removing the engine protection cover by unscrewing all the screws; then unscrew the oil drain bolt, allowing it to drain into a container for about ten minutes, as shown in the video. At this point, use the appropriate wrench to unscrew and remove the oil filter cartridge, replacing it with a new one; finally, pour in the new engine oil with the correct viscosity!

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Tata Hexa
How to Replace the Headlight Bulb on a Tata Hexa
Tata Hexa (2016-2020 / MK 1) To replace the headlight bulb on a Tata Hexa, open the hood to access the back of the headlight corresponding to the bulb that needs to be replaced. …
Replacing the Headlight Bulb on the Tata Hexa
Replacing the Headlight Bulb on the Tata Hexa
Tata Hexa (2016-2020 / MK 1) Today, you will see in this video tutorial how to disassemble and replace the headlight bulb on the Tata Hexa, following these simple and quick steps…
How to Install a Dash Cam in the Tata Hexa
How to Install a Dash Cam in the Tata Hexa
Tata Hexa (2016-2020 / MK 1) As shown in the video, installing a dash cam in the Tata Hexa is quite simple. You need a basic understanding of electronics to install it. Start at …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos