Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil and Oil Filter of the Tata Indica

Model: Tata Indica MK 1 - Years 1998-2008
Part: Engine oil

This guide outlines the steps to perform routine maintenance by changing the engine oil and oil filter of the Tata Indica. First, lift the vehicle and start by unscrewing the oil drain bolt located under the engine, allowing the fluid to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, replacing it with a new one. At this point, unscrew the filler cap and top up with new oil that meets the required specifications!

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Tata Indica (1998-2008 / MK 1) If you want to change the engine oil and filter on this car model yourself, the images from the video and the description below will help. After lift…
Tata Indica (1998-2008 / MK 1) In this tutorial, see how to replace the air filter in the Tata Indica, a very simple and quick operation. First, open the bonnet and locate the filt…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos