Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program the Tata Sumo Grande key?

Model: Tata Sumo Grande MK 2 - Years 2010-2014
Part: Key

We can program a new key with remote control for the Tata Sumo Grande without resorting to the workshop or special and expensive tools or software. The procedure is very simple but requires patience as all the steps must be performed perfectly, without skipping any steps, for everything to go well. To program a new key, therefore, all we have to do is insert it into the ignition cylinder and, without starting the engine, press the button with the four arrows and turn the key in the exact order and for the precise number of times and in the same sequence. which is indicated in the video.

Posted on 19 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How do I replace the timing belt on the Tata Sumo Grande?
How do I replace the timing belt on the Tata Sumo Grande?
Tata Sumo Grande (2008-2010 / MK 1) In order to replace the timing belt of the Tata Sumo Grande you have to open the hood so that you have access to the components inside the engine com…
How do you replace the diesel filter on the Tata Sumo?
How do you replace the diesel filter on the Tata Sumo?
Tata Sumo Grande (2010-2014 / MK 2) In order to replace the diesel filter of the Tata Sumo it will be possible to go and open the bonnet, so that the filter positioned in the left side …
Repair the central locking of the Tata sumo Grande
Repair the central locking of the Tata sumo Grande
Tata Sumo Grande (2010-2014 / MK 2) To repair the central locking of the Tata Sumo Grande, we must go under the steering column (since it is a car of Indian construction it has a right-…

Other guides you may be interested in

How to Remove the Rear Bumper of an Opel Corsa

How to remove the rear bumper of an Opel Corsa? Follow these steps carefully. This operation is not too complex if done in order. First, use a screwdriver or battery-powered drill to unscrew the securing screws located near the rear lights, then remove them from the body along with their connectors. Unscrew the screws located at the top of the bumper, then unscrew the screws on the sides of the wheel arch liners and at the bottom of the bumper. Once the bumper is free from any screws or pins, grasp it with your hands and pull it away from the body (disconnect any power cables if necessary).

Watch the video!


by ScegliAuto

More videos