Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Engine Oil and Oil Filter in the Tata Ace - Magic

Model: Tata Tata Various
Part: Engine oil

Video tutorial

Today's guide will show you the necessary procedure for carrying out the routine maintenance service, replacing the engine oil and oil filter in the Tata Ace, as well as the Magic. First, raise the vehicle and begin unscrewing the oil drain bolt located on the sump, using a socket or star key, allowing the oil to drain into a container for about ten minutes.

Next, using the appropriate tool, unscrew the oil filter; replace the filter cartridge with a new one and finally top up by pouring in the suitable oil!


Updated on 13 June 2026 by ScegliAuto


Related tutorials

Tata Tata Various The type of engine oil to use in the Tata Ace should have a viscosity rating of 15W40. Obtain a 3-litre container before starting the job. It is also…
Tata Tata Various This tutorial shows how to remove the air filter in the Tata Ace van, a straightforward task to perform if you need to clean or completely replace it…
Tata Tata Various In this new guide dedicated to your Tata Manza, we will explain the various steps to follow if you want to replace the front headlight bulb independe…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos