Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Tata Ace?

Model: Tata Tata Various
Part: Engine oil

The type of engine oil to use in the Tata Ace should have a viscosity rating of 15W40. Obtain a 3-litre container before starting the job. It is also advisable to get a container for the used engine oil and the appropriate tool to remove the oil filter, as it is unlikely that it can be unscrewed by hand as shown in the video. Remove the old engine oil by placing the collection container under the oil sump before unscrewing the plug. While it drains, replace the oil filter, ensuring it is properly lubricated before fitting. Tighten the oil sump plug and finally, pour in the new engine oil.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter in the Tata Ace - Magic
How to Replace the Engine Oil and Oil Filter in the Tata Ace - Magic
Tata Tata Various Today's guide will show you the necessary procedure for carrying out the routine maintenance service, replacing the engine oil and oil filter in the …
How to Remove the Air Filter in the Tata Ace Van?
How to Remove the Air Filter in the Tata Ace Van?
Tata Tata Various This tutorial shows how to remove the air filter in the Tata Ace van, a straightforward task to perform if you need to clean or completely replace it…
How to Change the Diesel Filters on a Tata Truck?
How to Change the Diesel Filters on a Tata Truck?
Tata Tata Various The procedure to replace the diesel filters (there are two on the Tata Truck) is straightforward and only requires a spanner of the correct size. Onc…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos