Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the air filter on the Tata Sumo?

Model: Tata Sumo Victa - Years 2004-2011
Part: Air filter

In order to replace the air filter on the Tata Sumo, you need to open the bonnet, so that you can access the filter box located at the front right headlight. The box must be removed from its housing by disconnecting the pipes connected to it and loosening the bolts which fix it together with the two transversal brackets. Once the box has been freed, it will be possible to remove the air filter from inside its housing so that a new one can be inserted; finally you will have to fix and connect the filter box again.

Posted on 21 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the oil filter on the Tata Sumo?
How do you replace the oil filter on the Tata Sumo?
Tata Sumo (2012-2019 / Gold) To be able to replace the oil filter on the Tata Sumo you need to access the lower part of the engine compartment, in correspondence with the left fr…
How to replace the diesel filter in the Tata Sumo?
How to replace the diesel filter in the Tata Sumo?
Tata Sumo (2012-2019 / Gold) In this tutorial we can see how to replace the diesel filter in the Tata Sumo, a very simple and fast operation. First of all we wait for the engine …
Where is the fuse box located in the Tata Sumo?
Where is the fuse box located in the Tata Sumo?
Tata Sumo (2008-2016 / Grande) If you are looking for the fuse box in your Tata Sumo and haven't been able to find it yet, don't worry because the following guide will help you sol…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos