Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on the Tata Winger

Model: Tata Winger MK 1 - Years 2007-2019
Part: Battery

If you notice that the battery in your vehicle is dead, you will need to replace it. The following description outlines the steps to follow for the replacement, and you can also refer to the images in the video for assistance. Once you open the hood, locate the battery on the left side of the engine compartment and disconnect the negative terminal first, followed by the positive terminal. Next, remove the battery from the engine compartment and take the new one to place it in its housing. Then reconnect the positive terminal first and finally the negative terminal, and you're done.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter in a Tata Winger Van?
How to Replace the Diesel Filter in a Tata Winger Van?
Tata Winger (2007-2019 / MK 1) In this tutorial, we will see how to replace the diesel filter in a Tata Winger van, an extremely simple and quick operation. First, ensure that the …
How to Replace the Rear Brake Shoes on a Tata Winger?
How to Replace the Rear Brake Shoes on a Tata Winger?
Tata Winger (2007-2019 / MK 1) To replace the rear brake shoes on a Tata Winger, lift the rear of the vehicle so it is not in contact with the ground. Then, loosen the wheel and dr…
How to Replace the Front Wheel Bearing on the Tata Winger?
How to Replace the Front Wheel Bearing on the Tata Winger?
Tata Winger (2007-2019 / MK 1) To replace the front wheel bearing on the Tata Winger, lift the vehicle with a jack so that the corresponding wheel is not in contact with the ground…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos