Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Tata Altroz

Model: Tata Altroz MK 1 - Years 2020-2026
Part: Warning light – error code

If you have changed the engine oil and filter on this vehicle model following the instructions in the manual, you must then reset the warning light that has illuminated on the dashboard. In the description below, you will find the instructions and steps to perform the reset. After accessing the cabin, turn on the ignition, then locate the two buttons at the bottom center of the dashboard and press and hold them for about 20 seconds until the display shows the reset service indication. Release the two buttons for a second and then press them again, holding them for another 10 seconds, after which the service light will turn off.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Tata Altroz
Tata Altroz (2020-2026 / MK 1) In this new mini guide dedicated to your Tata Altroz, you will discover how to manually reset the service light in just a few seconds. First, go insi…
How to reset the service indicator of Tata Altroz
How to reset the service indicator of Tata Altroz
Tata Altroz (2020-2026 / MK 1) The procedure to be implemented to complete the manual reset of the service light on the display of the instrument cluster of your Tata Altroz is rea…
How to Reset the Service Light on a Tata Altroz
How to Reset the Service Light on a Tata Altroz
Tata Altroz (2020-2026 / MK 1) If you want to manually reset the service light on your Tata Altroz but don't know how, don't worry because this mini guide will provide all the info…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos