Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Tata Magic

Model: Tata Magic MK 1 - Years 2007-2024
Part: Air filter

To replace the engine air filter on this vehicle model, follow the instructions below for a correct replacement. The air filter is located inside the cabin under the rear seat, so you need to remove the seat cushion first. Then, unscrew the fastening screws of the protective panel at the back. Underneath, you will find the filter housing. Next, unscrew the screws of the upper plate and remove the cover. Pull out the old filter and replace it with the new one, then close the cover, reattach the mounting bracket, and the protective panel.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windshield of the Tata Magic?
How to Replace the Windshield of the Tata Magic?
Tata Magic (2007-2024 / MK 1) To replace the windshield of the Tata Magic, detach the inner seal that runs along its entire perimeter: once this is removed, insert a thin object (…
How to Clean and/or Replace the Air Filter on the Tata Magic?
How to Clean and/or Replace the Air Filter on the Tata Magic?
Tata Magic (2007-2024 / MK 1) To replace the engine air filter in your vehicle, follow these instructions: to access the compartment containing the filter, you need to remove the …
How to Connect the Car Radio in a Tata Magic
How to Connect the Car Radio in a Tata Magic
Tata Magic (2007-2024 / MK 1) It's nice to travel while listening to music, and it's great when you can choose music from your smartphone and play it on your car radio. If you hav…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos