Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Tata Nano?

Model: Tata Nano MK 1 - Years 2008-2015
Part: Cabin air filter

In this tutorial, we can see how to disassemble the cabin filter in the Tata Nano, a very simple and quick operation to be carried out in case we need to clean it or replace it completely. First of all, let's go to the driver's seat, then remove the cover located in the joint between the central tunnel and the dashboard. Once this is done, locate the long rectangular door in front of the partition wall, open it by unscrewing the two fixing screws, and remove the old filter. Insert the replacement, making sure to respect its direction.

Posted on 8 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin filter in the Tata Nano?
How to replace the cabin filter in the Tata Nano?
Tata Nano (2008-2015 / MK 1) In this tutorial we can see how to replace the cabin air filter in the Tata Nano, an extremely simple and fast operation. First of all let's position…
How do you change the engine oil on the Tata Nano?
How do you change the engine oil on the Tata Nano?
Tata Nano (2008-2015 / MK 1) In order to replace the engine oil of the Tata Nano, you need to access the lower part of the car, where the oil drain plug is located. This must be …
How do I replace the interior light bulb on the Tata Nano?
How do I replace the interior light bulb on the Tata Nano?
Tata Nano (2008-2015 / MK 1) In order to replace the bulb of the interior lights of the Tata Nano you have to go and detach the ceiling light that covers it, positioned immediate…

Other guides you may be interested in

How to Remove the Spark Plugs on an Opel Astra

Want to remove the spark plugs on an Opel Astra? Here's how to proceed: pull the engine bay release lever and lift the front bonnet, securing it. Remove the plastic cover on the soundproofing panel covering the engine (if present), then remove the pins on the coil bar using a screwdriver. Disconnect the coils by hand after unplugging the power connector, then use your socket to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the engine head with the socket extension, tighten them and reconnect the respective power connectors. Finally, close the engine bay.

Watch the video!


by ScegliAuto

More videos