Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil of the Tata Nano?

Model: Tata Nano MK 1 - Years 2008-2015
Part: Engine oil

To change the engine oil of the Tata Nano, access the underside of the car where the oil drain plug is located. Unscrew this plug to collect the used oil in a suitably positioned container. Once all the oil has drained out, remove the oil filter located near the drain plug. After replacing the oil filter, refill by pouring new oil through the designated filler hole in the engine bay.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Tata Nano (2008-2015 / MK 1) In this tutorial, see how to remove the air filter on a Tata Nano. This operation is very simple and quick, to be done when you need to clean or repl…
Tata Nano (2008-2015 / MK 1) The diesel filter on the Tata Nano is located at the bottom of the vehicle: to access it, you will need to lift the car with a jack to locate the par…
Tata Nano (2008-2015 / MK 1) In this tutorial, you will see how to replace the air filter in a Tata Nano Twist, an extremely simple and quick operation. First, wait for the engin…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos