Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulb on a Tata Nano?

Model: Tata Nano MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Interior dome light bulb

Video tutorial

To replace the interior light bulb on a Tata Nano, you need to detach the light fitting covering it, located just behind the internal rear-view mirror. Once the light fitting is removed, you will be able to locate the bulb within the terminals.

This can then be released from its housing so that a new replacement can be inserted; after installation, you can close everything by repositioning the light fitting and checking that the new bulb works correctly.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulbs in the Tata Nano?
How to Replace the Headlight Bulbs in the Tata Nano?
Tata Nano (2008-2015 / MK 1) As we can see in this tutorial, replacing the headlight bulbs in the Tata Nano is a very simple and quick operation. Since the back of the headlight …
How to Replace the Rear Headlight Bulbs of the Tata Nano
How to Replace the Rear Headlight Bulbs of the Tata Nano
Tata Nano (2008-2015 / MK 1) This guide shows how to remove and replace the rear headlight bulbs of the Tata Nano, following the instructions below. First, access the rear of the…
How to Replace the Diesel Filter on a Tata Nano?
How to Replace the Diesel Filter on a Tata Nano?
Tata Nano (2008-2015 / MK 1) The diesel filter on the Tata Nano is located at the bottom of the vehicle: to access it, you will need to lift the car with a jack to locate the par…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos