Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulbs of the Tata Nano

Model: Tata Nano MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light bulb

Video tutorial

This guide shows how to remove and replace the rear headlight bulbs of the Tata Nano, following the instructions below. First, access the rear of the vehicle and start unscrewing the screws securing the rear panel to remove it; then unscrew the screws holding the rear light, disconnecting the electrical connector for the lights to remove it, as illustrated in the video.

At this point, remove the bulb holders along with the bulbs, replacing them with new ones; then reassemble everything, applying the reverse procedure!


Updated on 3 July 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulbs in the Tata Nano?
How to Replace the Headlight Bulbs in the Tata Nano?
Tata Nano (2008-2015 / MK 1) As we can see in this tutorial, replacing the headlight bulbs in the Tata Nano is a very simple and quick operation. Since the back of the headlight …
How to Replace the Diesel Filter on a Tata Nano?
How to Replace the Diesel Filter on a Tata Nano?
Tata Nano (2008-2015 / MK 1) The diesel filter on the Tata Nano is located at the bottom of the vehicle: to access it, you will need to lift the car with a jack to locate the par…
How to Replace the Interior Light Bulb on a Tata Nano?
How to Replace the Interior Light Bulb on a Tata Nano?
Tata Nano (2008-2015 / MK 1) To replace the interior light bulb on a Tata Nano, you need to detach the light fitting covering it, located just behind the internal rear-view mirro…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos