Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs in the Tata Nano?

Model: Tata Nano MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

Video tutorial

As we can see in this tutorial, replacing the headlight bulbs in the Tata Nano is a very simple and quick operation. Since the back of the headlight is not easily accessible from the engine bay, you will first need to remove it from the bodywork.

To do this, start by opening the bonnet, then unscrew the two fixing bolts with a 10 mm spanner. Next, tilt the headlight enough to access the back, allowing you to disconnect the connector and remove the rubber cover.

Finally, extract the bulb by unlocking the metal clip and install the replacement by following the reverse procedure.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlight Bulbs of the Tata Nano
How to Replace the Rear Headlight Bulbs of the Tata Nano
Tata Nano (2008-2015 / MK 1) This guide shows how to remove and replace the rear headlight bulbs of the Tata Nano, following the instructions below. First, access the rear of the…
How to Replace the Diesel Filter on a Tata Nano?
How to Replace the Diesel Filter on a Tata Nano?
Tata Nano (2008-2015 / MK 1) The diesel filter on the Tata Nano is located at the bottom of the vehicle: to access it, you will need to lift the car with a jack to locate the par…
How to Replace the Interior Light Bulb on a Tata Nano?
How to Replace the Interior Light Bulb on a Tata Nano?
Tata Nano (2008-2015 / MK 1) To replace the interior light bulb on a Tata Nano, you need to detach the light fitting covering it, located just behind the internal rear-view mirro…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos