Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Tata Tiago?

Model: Tata Tiago MK 1 - Years 2016-2024
Part: Service warning light

To reset the Service light on the Tata Tiago, turn the ignition key to the ON position to power up the instrument cluster. Once the instrument cluster is on, repeatedly press the MODE button located in the center of the cluster. This will allow you to scroll through the menu until you find the maintenance interval option. At this point, press and hold the SET button until it resets; after the reset, you can turn off the instrument cluster.

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on the Tata Tiago
How to reset the service indicator on the Tata Tiago
Tata Tiago (2016-2024 / MK 1) To manually reset the service light on the instrument panel of your Tata Tiago, simply follow these steps. First, make sure the instrument panel is t…
How do you reset the Service light on the Tata Tiago?
How do you reset the Service light on the Tata Tiago?
Tata Tiago (2016-2024 / MK 1) The procedure to reset the Service light on the Tata Tiago involves turning on the instrument panel and navigating through the menu that appears by r…
How to Reset the Service Light on the Tata Tiago
How to Reset the Service Light on the Tata Tiago
Tata Tiago (2016-2024 / MK 1) If the service light on your Tata Tiago's instrument cluster keeps appearing even after the regular maintenance has been performed, don't worry becau…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos