Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure Warning Light on the Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Tire pressure warning light

If the tyre pressure warning light (yellow and shaped like a tyre section with an exclamation mark in the centre) remains illuminated on the left side of the dashboard, it is likely that a tyre may be slightly deflated or even punctured. Once you have checked the correct inflation pressure of the tyres, locate the button to perform the reset, which is situated just below the steering column, near the brake lever. Turn on the ignition, press the button, and hold it until the light flashes three times and then turns off, before switching off the ignition.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (2011-2019 / Xp130) In today's tutorial, you will see where the button to reset the tyre pressure warning light on a Toyota Yaris is located, along with the procedure to…
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure light on the Toyota Yaris, first inflate the tyres to the correct pressure, which is indicated on the sticker attached to …
Toyota Yaris (2011-2019 / Xp130) Today's instructions will show us how to reset the tire pressure warning on the Toyota Yaris; before resetting the TPMS sensors, it is necessary for …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos