Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to identify and replace a blown fuse?

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuse box

See other generations:
Video tutorial

When an electrical component of a vehicle suddenly stops working, it is important to check the fuse box before proceeding with any replacements to determine if the fault originates from the corresponding fuse. For example, on Toyota Yaris vehicles, it is necessary to check both fuse boxes or at least refer to the fuse diagram to carry out the replacement.

Today, we will check the condition of the fuses located in the engine bay fuse box. Once the faulty fuse is found, remove it and insert a fuse with the same amperage.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

Locating the Fuse Box and Its Position
Locating the Fuse Box and Its Position
Toyota Yaris (2011-2019 / Xp130) Fuses are contained in a box within the engine compartment; the cover of the box indicates the fuse values, their positions, and which circuits they …
Where is the Position Light Fuse on a Toyota Yaris?
Where is the Position Light Fuse on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) The fuse for the position lights on a Toyota Yaris produced from 2005 to 2012 is located inside the fuse box in the cabin. Specifically, the box is f…
Where is the windscreen wiper fuse on the Toyota Yaris?
Where is the windscreen wiper fuse on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) The fuse that controls the operation of the windscreen wipers on the Toyota Yaris is located in the fuse box at the lower left of the dashboard, next…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos