Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of a Toyota RAV4 key

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Key

Video tutorial
Detailed instructions - Today we will see how to change the battery of a Toyota RAV4 produced from the year 2013 to the year 2018. So let's start the procedure by extracting the physical emergency key by pressing the appropriate release button on the side of the remote control, then insert the key just extracted into the slot where it was stored and then lever on the cover of the remote control to open it as shown in the video. Once this is done, we can proceed to remove the old key battery and replace it with a new one, then close everything following the procedure in reverse. The necessary battery is the CR 2032.

Posted on 29 August 2024 by ScegliAuto


Related tutorials

How to change the battery of the Toyota RAV4 remote control
How to change the battery of the Toyota RAV4 remote control
Toyota Rav 4 (2019-2026 / Xa50, MK 5) In this new guide aimed at all of you who own a Toyota RAV4 latest model, we will explain to you all the various steps you need to take to successful…
How to change the battery of the Toyota RAV4 key.
How to change the battery of the Toyota RAV4 key.
Toyota Rav 4 (2000-2006 / Xa20, MK 2) In this guide aimed at all of you who own a Toyota RAV4, we will help you complete the procedure to replace the battery inside the key. First of all,…
How to change the key battery of a Toyota Rav4?
How to change the key battery of a Toyota Rav4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) The remote battery for the Toyota Rav4 is a 3-volt button cell type CR2032. Depending on the brand, the price can range from 25 pence to a maximum of…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Citroën DS4?

The tyre pressure warning light on the Citroën DS4 can be reset by inflating the tyres until they reach the corresponding pressure value, which is indicated on the sticker attached to the driver's door pillar. Once all tyres are at this value, turn on the ignition by inserting the key into the ignition switch; this should make the warning light disappear from the dashboard. If it does not reset, start the engine and drive to allow the sensors to read the new values.

Watch the video!


by ScegliAuto

More videos