Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Change the battery of the Toyota Yaris remote control.

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Key

In this video we see how to proceed to replace the battery of the remote control that opens and closes the doors of the Toyota Yaris, inserted in the ignition key. Using a flathead screwdriver, we lever in the key ring area to separate the two shells; inside we will find a small box with the buttons, always using the screwdriver we lever on the edges, and open the box accessing the battery compartment. We remove the old battery and replace it with a new one, being careful to position the positive side up. We close the box, insert it between the two shells and press them until they lock.

Posted on 26 September 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Key Battery on a Toyota Yaris
How to Change the Key Battery on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Today, we will show you how to change the remote battery on a Toyota Yaris. Take your remote and slide the button to release the metal key. Once extr…
How to replace the battery of the 2017 Toyota Yaris remote control
How to replace the battery of the 2017 Toyota Yaris remote control
Toyota Yaris (2011-2019 / Xp130) When the battery of the Toyota Yaris remote control runs out, to replace it we must proceed with the following steps: -Insert a small flat-head screw…
How to change the battery of the key remote for a Toyota Yaris.
How to change the battery of the key remote for a Toyota Yaris.
Toyota Yaris (2011-2019 / Xp130) In this tutorial, you can see how to replace the battery of the remote control for a Toyota Yaris car key. Take the car remote and slide the small bu…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2011-2019 - What problems afflict the Toyota Yaris key? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos