Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Toyota Corolla?

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on the Toyota Corolla, inflate the tyres to the correct pressure: this value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, enter the cabin and turn on the ignition: the warning light should turn off automatically once the ignition is on. If the light does not turn off immediately, you may need to drive for a few miles for the sensors to read the new values.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on the Toyota Corolla Hybrid
How to reset the tyre pressure warning light on the Toyota Corolla Hybrid
Toyota Corolla (2019-2026 / MK 5, E210) Below are the steps necessary to reset the tyre pressure warning light on the Toyota Corolla Hybrid; before performing the reset, ensure all four tyr…
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla?
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla?
Toyota Corolla (2019-2026 / MK 5, E210) To reset the tyre pressure warning light on a Toyota Corolla, first inflate the tyres to the recommended pressure: this value is indicated on the sti…
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla?
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) The procedure to reset the tyre pressure warning light on the Toyota Corolla involves first inflating the tyres until they reach their correct pressu…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos