Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Use the Cruise Control in the Toyota Tacoma

Model: Toyota Tacoma N300 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

The steps in this guide will show you how to use the cruise control in the Toyota Tacoma, following the instructions below. First, get in the vehicle and start the engine; then locate the cruise control switch, which is on the lever behind the steering wheel, as shown in the video.

You can activate it after reaching a certain speed, at which point you can set the cruise control speed; pressing the brake pedal or accelerating will deactivate the cruise control system.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to Disable Traction Control on the Toyota Tacoma?
How to Disable Traction Control on the Toyota Tacoma?
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) You can disable the traction control on the Toyota Tacoma by turning on the ignition, allowing you to use the appropriate controls. Once the ignition…
How to deactivate the traction control on the Toyota Tacoma
How to deactivate the traction control on the Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) For illustrative purposes, we will see the steps that will allow us to deactivate the traction control on the Toyota Tacoma; it is recommended not to…
How to Disable Traction Control on the Toyota Tacoma
How to Disable Traction Control on the Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) These simple steps will show you how to temporarily disable traction control on the Toyota Tacoma; it is recommended not to disable traction control …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos