Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Calibrate the TPMS Sensors on the Toyota Highlander

Model: Toyota Highlander Xu50 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

In this guide, you will find instructions to perform the calibration of the TPMS sensors on the Toyota Highlander. First, get into the vehicle and connect your diagnostic software to the OBD port; to ensure correct pressure registration, all four tyres must be at the operating pressure.

Then, bring the appropriate tool close to the four TPMS sensors to register them; this way, the computer will register the pressures in the control unit, resetting the tyre pressure warning on the instrument panel!


Updated on 6 November 2026 by ScegliAuto


Related tutorials

Reset of the tire pressure warning for the Toyota Highlander.
Reset of the tire pressure warning for the Toyota Highlander.
Toyota Highlander (2001-2007 / Xu20) The steps outlined in this guide will allow us to reset the tire pressure warning for the Toyota Highlander. Before performing the reset of the TPMS …
Resetting the TPMS light on the Toyota Highlander
Resetting the TPMS light on the Toyota Highlander
Toyota Highlander (2020-2026 / Xu70) Today's instructions will allow us to reset the TPMS light on the Toyota Highlander; before resetting the tire pressure light, it is necessary that a…
Resetting the TPMS Light on the Toyota Highlander
Resetting the TPMS Light on the Toyota Highlander
Toyota Highlander (2001-2007 / Xu20) Today's guide will show you the main steps to reset the TPMS light on the Toyota Highlander; before resetting the pressure light, ensure all four tyr…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos