|
Do it yourself
| |||
| ||||
How to reset the "Service" light on a Toyota Rav4?
Model: Toyota Rav 4
Xa50, MK 5
- Years 2019-2026
To reset the "Service" indicator on a Toyota Rav4, turn on the instrument panel without starting the vehicle. Using the buttons on the steering wheel, access the main menu displayed on the instrument panel. Scroll through the options until you reach the section dedicated to maintenance or service intervals. Select this option with the confirm button and proceed to locate the option to reset the service reminder. Press and hold the confirm button for a few seconds, allowing the system to complete the reset. Once finished, turn off and turn on the instrument panel to verify that the warning has been eliminated. In this way, the system is updated to properly monitor future maintenance interventions, removing any residual notifications on the display.
Posted on 5 December 2024 by ScegliAuto
Video tutorial
Related tutorials
Toyota Rav 4
(2019-2026 /
Xa50, MK 5)
To reset the "Service" light on a Toyota RAV4, start by turning on the instrument panel without starting the engine. Use the buttons on the steering …
Toyota Rav 4
(2019-2026 /
Xa50, MK 5)
To reset the "Service" light on a Toyota RAV4, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel to nav…
Toyota Rav 4
(2006-2013 /
MK 3, Xa30)
Briefly, here are the instructions to reset the maintenance light for the oil change on the Toyota RAV4. First, get inside the vehicle and press and …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.419
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
