Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse position and diagram on Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Fuse box

The fuse box of the Toyota Yaris XP90 is located in the engine compartment, on the left side. To access it, follow these steps. Turn off the vehicle: make sure the vehicle is turned off and park it on a flat surface. Lift the front hood: open the front hood and locate the fuse box on the right side of the engine compartment. Remove the cover: simply with your hands, remove the cover of the fuse box to access the fuses. Replace the cover after replacing the affected fuses. Refer to the diagram in the video or in the owner's manual provided with the vehicle.

Posted on 18 December 2024 by ScegliAuto

Video tutorial

Related tutorials

What is the Fuse Diagram and Where is the Fuse Box on a Toyota Yaris?
What is the Fuse Diagram and Where is the Fuse Box on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) The video attached to this article shows the exact diagram and placement of all the fuses in your Toyota Yaris. Fuses are designed to prevent damage …
Fuse Position and Diagram for the Toyota Yaris
Fuse Position and Diagram for the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this brief and simple guide, we will look at the positioning and how to find the diagram and layout of the fuses for the Toyota Yaris. First, open…
Layout and positioning of the fuses in the Toyota Yaris
Layout and positioning of the fuses in the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) These short and simple instructions will show us the positioning and the fuse layout of the Toyota Yaris. First, we open the front door on the driver…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer
    • Yaris 2005-2011 - What is the Toyota Yaris horn fuse? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos