Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit a Front Bumper on a Toyota Yaris

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Front bumper

How to fit a front bumper on a Toyota Yaris? Here’s how to proceed; it’s not too complex if done in order. First: open the bonnet by pulling the bonnet release lever and secure it with the prop rod. Unscrew the screws located at the bottom of the bumper, then remove the screws at the sides of the wheel arch liners. Once the bumper is free from any screws or pins, grasp it with your hands and pull it away from the bodywork (disconnect any wiring harnesses). Finally, fit the new bumper following the steps for removal.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Start by opening the bonnet of your Toyota Yaris by pulling the designated release handle located at the bottom left of the steering column. Next, un…
How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Before you start, open the bonnet of your Toyota Yaris. Begin by unscrewing and removing the screws that secure the front bumper to the chassis, loca…
How to Remove the Headlamp from the Toyota Yaris 2
How to Remove the Headlamp from the Toyota Yaris 2
Toyota Yaris (2005-2011 / Xp90) How do you remove the headlamp from the Toyota Yaris? To remove the front headlamp of the Yaris, you need to take off the front bumper. Use a screwdr…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos