Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of a Toyota RAV4?

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part: Air filter

To replace the air filter of your Toyota RAV4, start by opening the front hood. Then you will need to locate the air filter box, usually located above or next to the engine. Use a screwdriver to remove the clips or screws that secure the box. Lift the cover and remove the old filter, being careful with the orientation. Clean the box from any debris. Place the new filter, making sure it is properly inserted. Close the box and secure the cover. Verify that everything is properly secured and start the engine for a final check.

Posted on 11 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine air filter of the Toyota RAV4
How to replace the engine air filter of the Toyota RAV4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) If you own a latest model Toyota RAV4 and want to replace the engine air filter yourself, just read the following guide and follow the short and simp…
How to Replace the Air Filter on a Toyota RAV4
How to Replace the Air Filter on a Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this video tutorial, you can see how to replace the air filter on a Toyota RAV4 by following some simple steps: the first thing to do is to purcha…
How to replace the air filter on the Toyota RAV4?
How to replace the air filter on the Toyota RAV4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) If you own a fifth-generation Toyota RAV4 (year 2019-2023) and intend to replace the engine air filter yourself, follow the steps outlined in this gu…

Other guides you may be interested in

Removing the Door Panel of the Peugeot 208

Today we will discover the procedure for removing the front door panel of the Peugeot 208. First, open the front door of the vehicle and start unscrewing all the fixing screws found on the door panel, as well as inside the window switch and behind the various plastic covers; use a spanner or Torx screwdriver, as shown in the video. At this point, disconnect the electrical connector of the window switch and pry at the sides to remove the door panel, allowing access to the inside of the door.

Watch the video!


by ScegliAuto

More videos