Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate bulbs of the Toyota Yaris

Model: Toyota Yaris MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: License plate light

See other generations:
Video tutorial

In this guide we will see the instructions that will allow us to disassemble and replace the license plate lights of the Toyota Yaris. First, we open the rear door of the trunk and start removing the interior lining of the door; then we proceed to remove the license plate light fixture, removing the bulb from the socket, as shown in the video.

At this point we install the new license plate light, of the correct type and with the same connection; we insert it in the correct direction and check its operation, finally fixing the fixture and reassembling the interior lining of the trunk door!


Posted on 6 May 2025 by ScegliAuto


Related tutorials

How to Replace the Number Plate Bulbs on the Toyota Yaris
How to Replace the Number Plate Bulbs on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Follow this guide for instructions on how to remove and replace the number plate bulbs on the Toyota Yaris. First, open the boot lid and start prisin…
How to Replace the Number Plate Bulbs on the Toyota Yaris
How to Replace the Number Plate Bulbs on the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) These brief steps will show you how to dismantle and replace the number plate bulbs on the Toyota Yaris, following the instructions below. First, mov…
How to Replace the Number Plate Bulb on a Toyota Yaris
How to Replace the Number Plate Bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video, see how to replace the damaged number plate bulb fitted on a Toyota Yaris. Use a screwdriver to remove the number plate light unit loc…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos